CenturionPro High Performance Bucking Machine
CenturionPro High Performance Bucking Machine
CenturionPro High Performance Bucking Machine
The CenturionPro HP Bucking Machine Is Pure Harvest Power
HP refers to "High Performance" and represents our workhorse line of buckers, which include single and triple-workstation options. The high production value of these machines results in the industry’s highest buck rate per hour. The HP line utilizes two rollers that pull the stem into the machine, therefore popping the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming.
The High Performance Bucker comes in 4 models
HPTT - High Performance Tabletop
Pound for pound, the market’s most compact and cost-efficient bucker. Ideal for stems up to 3/8", with 2-hole sizes to strip plants carefully and comprehensively, the robust machine can process up to 75 pounds of flower per hour (up to 15 pounds dry). The impressive power and precision are driven by a 0.5 HP motor with variable speed control, for enhanced versatility in bucking wet and dry plants.
HPM - High Performance Mini
Expanding on CenturionPro’s vision to develop an industry-leading bucker for every harvest, the HP Mini Bucker is a powerful yet affordable solution to streamline small to medium harvests. The HP Mini Bucker comes with three hole sizes, accepts wet or dry stems up to 1/2”, and can buck up to 125 lbs per hour wet (up to 25 lbs per hour dry).
HP1 - High Performance 1
The HP1 comes with a bucker stand and table-top set-up legs included for added value and versatility. With 5-hole sizes, the HP1 accepts wet or dry stems up to 3/4” and can process up to 175 lbs wet (up to 35 lbs dry) per hour, replacing 5-7 human workers. When combined with the high productivity of the CenturionPro trimming machines, you’ll get the highest capacity harvesting system in the world!
HP3 - High Performance 3
The HP3 Triple Bucker provides triple the production capacity of the HP1, resulting in the industry’s highest buck rate per hour. This bucker utilizes two rollers per workstation that pull the stem into the machine, therefore popping the flowers off. Complete with three workstations, the HP3 Triple Bucker is a multi-operator-run industrial de-stemming machine that requires 3 operators for optimal speed and efficiency.
Key Features & Benefits of the High Performance Buckers
- Feed Throughput
- HPTT 75 lbs/hr (Wet)
- HPM: 125 lbs/hr (Wet)
- HP1: 175 lbs/hr (Wet)
- HP3: 500 lbs/hr (Wet)
- Feed Entry Sizes
- HPTT: (1/4", 3/8")
- HPM: (1/4", 3/8", 1/2")
- HP1/3: (3/16", 1/4", 3/8", 1/2", 3/4")
- Primary Material: 304 Stainless Steel / Aluminum
- Feed Types: Wet & Dry
- GPM/UL/CE/RoHS Compliant
Optional Upgrade: Stand for HPTT & HPM
*Stand is included on the HP1 & HP3*
Both the High Performance Tabletop & High Performance Mini can be upgraded with a stand to elevate your bucking game! The stand for the HPM is the same stand that the HP1 uses. The HPTT uses its own unique stand for those who require an extra lift in their tight harvest spaces.
Triple your throughput the HP3 Bucking Machine
The HP3 Triple Bucker provides triple the production capacity of the HP1, resulting in the industry’s highest buck rate per hour. This bucker utilizes two rollers per workstation that pull the stem into the machine, therefore popping the flowers off.
Complete with three workstations, the HP3 Triple Bucker is a multi-operator-run industrial de-stemming machine that requires 3 operators for optimal speed and efficiency. Each workstation has 5 different sized holes to provide versatility and improve processing capacity.
The HP3 Triple Bucker accepts stems up to 3/4” in diameter and can buck 500+ pounds per hour of fully hydrated flower (100lbs dry flower). This triple-headed machine comes with a bucker stand included for added value and ease of de-stemming. The bucker stand comes standard with industrial casters.
When combined with the high productivity of a CenturionPro trimming machine, you’ll get the highest capacity harvesting system in the world! The HP3 Triple Bucker comes complete with three 0.75 HP gear-driven motors with a variable speed controller to provide unsurpassed power, adjustability, and control. Thanks to the variable speed controls, wet or dry flower can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP3 Triple Bucker plugs into a 110-volt, 20-amp circuit – EU/AUS compatible. Backed by a 5 years warranty.
The HP3 Triple Bucker is quickly making a name for itself as the highest capacity bucker in the world! This bucker is simple, powerful, and effective and will process products at an unprecedented rate
Preparation for using the HP Buckers & Tip for Dry Bucking
Environment Preparation
- Ensure adequate space
- Review electrical requirements
- Have adequate bins for product transport
- Cooler temperatures in the processing room are beneficial
Plant Preparation
- Cut the main stalk
- Separate each individual stem (no 'y' junctions)
- Leave 3" of stem for clearance into the machine
- Ensure clean angled cuts for precise feeding
Feeding
- Keep prepped product stem side up for efficiency
- Size the stem to fifit the ideal hole
- Feed end first into the machine
- Use variable speed control to adjust the flow
Moisture Content
- Moisture content is critical for ensuring minimal damage to the flower
- Flower that is too dry will fall apart
- Flower that has too much moisture will compact and dent
- For best results with dry bucking, moisture content should be between 12% and 14% when using a machine
Bud Consistency
- Buds should be "springy"- when the flower is squeezed between two fingers it will rebound and return to its original shape
- Both big and smaller stems must be pliable when bucking with a machine such as a GC or HP System
- Pliable stems ensure that they fold and are stripped upon entering the bucking machine. If too brittle, they will simply break off and will not be properly stripped
Machine Speed
- Slowing the machine speed for dry bucking will lead to a better result
- Dry bucking at 1/2 or 1/3 of the regular speed will ensure better results
- The variable speed control offered by our HP Bucker is a great feature when bucking dry material
Specifications for the High Performance Buckers
Model | HPTT |
---|---|
Input Voltage | 120V, 60Hz Single Phase |
Current Draw | 1.24A Operating |
Motor | 0.33 HP |
Motor RPM | 1675 RPM |
Weight (w/o stand) | 46 lbs. / 21 kg |
Length | 18 in. |
Width | 15 in. |
Height | 18 in. |
Circuit Breaker Required | 15A/120V |
Model | HPM |
---|---|
Input Voltage | 120V, 60Hz Single Phase |
Current Draw | < 6A Operating |
Motor | 0.75HP, IP54 |
Motor RPM | 1690 RPM |
Weight (w/o stand) | 97 lbs. / 45 kg |
Length | 22 in. / 56 cm. |
Width | 16 in. / 41 cm. |
Height | 20 in. / 51 cm. |
Circuit Breaker Required | 15A/120V |
Model | HP1 |
---|---|
Input Voltage | 120V, 60Hz Single Phase |
Current Draw | < 2.5A Operating |
Motor | 0.75HP, IP54 |
Motor RPM | 1690 RPM |
Weight (w/o stand) | 198 lbs. / 90 kg |
Length | 37 in. / 94 cm. |
Width | 32.5 in. / 83 cm. |
Height | 59 in. / 150 cm. |
Circuit Breaker Required | 15A/120V |
Model | HP3 |
Input Voltage | 120V, 60Hz, Single Phase |
Current Draw | 7.5A Operating |
Motor | 0.75HP, IP54 (x3) |
Motor RPM | 1690 RPM (x3) |
Weight (w/ stand) | 471 lbs / 214 kg |
Length | 93 in. / 236 cm. |
Width | 32.5 in. / 83 cm. |
Height | 52 in. / 130 cm. |
Circuit Breaker Required | 20A/120V |
Weight (lbs) | 150.00 |
Length (in) | 30 |
Width (in) | 30 |
Height (in) | 30 |
Barcode | 850019627183 |
UL Listed | No |
Trimmer Type | Destemer/Bucker |
Operation | Motorized |
Feed Type | Single Branch |
Plant Material | Dry, Wet |
Max. Stem Diameter | 1/2" |
Production Capability | Dry: +25 lbs/hr | Wet: +125 lbs/hr |
Voltage | 120 Volts |
Amps | 6 Amps |