Twister Trim saver, T2

Remove and separate trim without damaging it! With radial cyclone technology generating airflow from a vacuum, trim is collected intact, ready to be used for extractions and processing. Easy to use, easy to disassemble, and easy to clean, the Twister Trim Saver CS-18 can be used for WET or DRY trimming to give you the most from your plants. The Twister Trim Saver CS-18 works for both Wet or Dry Twister T2 Trimmers.

4,381.35 4381.35 USD 4,381.35


The Twister Trim Saver CS-18 is a revolution in trim collection and preservation for T2 Twister Leaf Trimmer. With previous Twister Trimmer vacuums, trim was pulled through an impeller, causing it to become "mulched" and making it harder to process afterward. The new Twister Trim Saver CS-18 has a cyclone system that collects trim before it hits the impeller, thus leaving it intact. This is huge for wet and dry trimming, ensuring valuable trim is preserved for extraction and processing. By giving you the most from your trim, the Twister Trim Saver CS-18 easily increases the value of your harvest.

The Twister Trim Saver CS-18 works for both WET and DRY Twister T2 Trimmers. The Twister Trim Saver is available for both the Twister T2 (CS-18) AND Twister T4 (CS-18).

Twister Trim Saver CS-18 Features:

Cyclonic Design
An industry first, the Twister Trim Saver CS-18 uses radial cyclone technology to collect your valuable trim, generating airflow from a vacuum and effectively bypassing the impeller used in traditional vacuum-based trim collection systems.

Simple Operation
TheTwister Trim Saver CS-18 is truly plug-and-play. Simply connect the vacuum hose to the trimmer and hit the power switch. It’s that simple.

Industry Best Trim Quality
Whether using WET or DRY Twister T2 Trimmers, the Twister Trim Saver CS-18 provides maximum separation efficiency of trim, collecting over 99% of your product in an easy-to-empty collection bin beneath the cyclone.

Easy to Clean
Designed from the ground up for easy disassembly and cleaning, the Twister Trim Saver CS-18 comes with a removable “trim collection bin”, allowing for quick 2 minute wipedowns between trim sessions.

Twister Trim Saver CS-18 Specifications:

  • Input Voltage: 240V
  • Motor: 3 hp
  • Amps (running): 9
  • Amps (startup): 49
  • Motor Speed: 3450 RPM
  • Airflow Capacity: 1700 CFM
  • Static Pressure: 10 in H20
  • Impeller: 12.75 in.
  • Inlet (cyclone): 6 in.
  • Height: 72 in.
  • Weight: 170 lbs.
  • Circuit Breaker Required: 15A, 240V
  • Connector (plug): NEMA 6-20P
  • Sound Rating: 80 db
  • Fused: Yes
  • Filter Bag: 1-80 Micron
  • Collection Bag: N/A

  • Twister Trim Saver CS-18 Replacement Parts

    • Bag Clamp
    • Filter Bag
    • Gaskets

    Twister Trim Saver CS-18 Maintenance:


    • Separator
    • Hoses
    • Impeller Housing


  • Filter Bag

SKU: 23-0200-01-P
  • Voltage Selection

This combination does not exist.


Voltage Selection 240 Volt