TrolMaster Temperature Device Station


66.50 66.5 USD 66.50


Specially designed for the control of temperature devices in the Hydro-X Control System. Temperature control relay, single pack with a cable set.

  • Voltage

This combination does not exist.

TrolMaster Temperature Device Station

The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected, and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

  • LED Power Indicator
  • RJ12 Cable Socket
  • Addressing
  • Plug & Play
Package Contains

  • 1x Device Station
  • 1x 16 ft.RJ12 Cable
  • 1x 4 ft. RJ12 Cable
  • 1x RJ12 T-Splitter

Weight (lbs)0.75
Length (in)3.35
Width (in)3.15
Height (in)3.54
Output Voltage 100~240 VAC, 50/60Hz
Output Current 10 Amps
Output Voltage 100~240 VAC, 50/60Hz
Working Environment Temperature 32-122°F, Humidity=90%