TrolMaster Program Device Station

SKU: DSP-1

66.50 66.5 USD 66.50

0.00

Specially designed for the control of program devices in the Hydro-X Control System. Timer program control relay, single pack with a cable set.

  • Voltage

This combination does not exist.


TrolMaster Program Device Station


The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

Features
  •  LED Power Indicator
  •  3-Prong Attaching Plug
  • RJ12 Cable Socket
  • Addressing
  • Plug & Play 


Weight (lbs)0.73
Length (in)3.35
Width (in)3.15
Height (in)3.54
Barcode6970207970342
Input Voltage100~240 VAC, 50/60Hz
Output Current10A
Output Voltage100~240 VAC, 50/60Hz
Working EnvironmentsTemperature 32-122°F, Humidity=90%