TrolMaster Emergency Stop Station

SKU: DSE-1

98.80 98.8 USD 98.80

98.80

The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal operation. The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.

    This combination does not exist.


    TrolMaster Emergency Stop Station

    The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal operation. The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.

    LED status:
    * Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
    * Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
    * SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected, and currently turned ON.
    * Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

    Features
    • LED Power Indicator
    • RJ12 Cable Socket
    • Addressing
    • Plug & Play 
    Package Content
    • 1 x Emergency Stop Device Station
    •  1 x 16ft RJ12 Cable
    •  1 x  4ft RJ12 Cable
    •  1 x  RJ12 T-Splitter
    Weight (lbs)0.75
    Length (in)3.35
    Width (in)3.15
    Height (in)3.54
    Barcode6970207971295
    Input Voltage100~240VAC, 50/60Hz
    Output Current10A
    Output Voltage100~240VAC, 50/60Hz
    Working EnvironmentTemperature 32-122°F, Humidity=90%