The Trimpro Original is an effective and very quiet leaf trimmer. It is used to remove excess leaves and to cut twigs from different types of plants and flowers. The Trimpro Original is also used to cut plants and bushes like rosemary, oregano, basil, mint, lavender, coriander, parsley and to prepare essential oils and mixed flowers for potpourri. Its blade, made of tempered steel, allows a clean cut without damaging the plant.
The Trimpro Original is equipped with a leaf recovery system and is quickly disassembled for easy transportation. For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth movement, rotating the plant at the same time.
You can also add on adjustable height leg extensions, which give you more comfort and flexibility in how you trim. You can stand up or sit down throughout the day, saving your back, hips, and feet! You also have control over the blade, and since you manually move the flower over the trimming grate, you get even more control over the trimming process. Compared to hand trimming, using this machine is super easy and won't wear you out or give you hand cramps. All trimmings are collected for easy disposal or processing in a mesh bag.
Trimpro Original General Warnings
Never place your fingers, gloves or any other body part in contact with the grate or the blade. Never apply pressure on the grate. Do not use scissors, knives or any instrument above the grate. Safety glasses and gloves are required at all time. The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous!
Be Aware! The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
Frequently Asked Questions:
How Do I clean My Trimpro Machine?
Use a plastic scraper to collect the pollen build-up. Do not use a metal scraper as it might scratch the coating on the grate and the blade. Use a cloth with rubbing alcohol to finish cleaning it.
How Do I Clean My Trimpro Bag?
Soak the bag in warm water, rub off the build up. You can also soak it in rubbing alcohol for a short amount of time, rub off the residue and simply pass it through some running water to finish cleaning it.
How Do I Adjust The Height Of My Trimpro Blade?
Blade height adjustment instructions can be found for each machine on their respective instruction sheet.
How Often Should I Sharpen My Trimpro Blade?
Trimpro blades are made of tempered steel which makes them very tough and gives them a great lifespan. It is important for the quality of your manicure to keep them sharp. It is manufacturer recommend to have them sharpened every 6 months to every year (highly depending on usage).
How Do I Sharpen My Trimpro Blade?
Sharpening the blade on Trimpro trimmers is a simple process. The most important part of the process is that you should not remove the blade from the hub to which it is attached! The tempered steel blades are balanced on the aluminum hub, allowing optimal operation of the trimmers. If the blade is separated from the hub there is no guarantee that the assembly will be balanced when you put it back into the machine. Sharpening instructions can be found for each machine on their respective instruction sheet.
How Do I Change The Amount Of Air Suction On My Trimpro Machine?
On every machine (except the Rotor) you can bend the flaps upwards to reduce their angle. This creates less air displacement, thus decreasing the amount of suction. You can bend the flaps downwards to increase their angle. This creates more air displacement thus increasing the amount of suction.
*CAUTION: When bending the flaps downwards, make sure the flaps do not hit the metal wire brake line.
How Long Is The Warranty On My Trimpro Machine?
There is one year warranty for defective parts. If you are making a warranty claim, please have in hand the serial number engraved on the underside of the frame of the machine.