Super Sprouter Root Rain Spray Cloner, 24 Site

SKU: HGC726260

100.49 100.49000000000001 USD 100.49

100.49

Super Sprouter® Root Rain® 24 Site Spray Clone Machine is a complete system to start 24 individual plant cuttings or clones. The spray generated from the aeroponic cloner offers suspended cuttings and a rich combination of oxygen and water for accelerated and healthy root growth. Super Sprouter® Root Rain® Cloner is easy to assemble and simple to use. Comes with tub, lid, 30 multicolored neoprene inserts, internal sprayer and pump, air pump, 4 in air stone, tubing, and instructions.

    This combination does not exist.


    Super Sprouter Root Rain Spray Cloner, 24 Site

    Super Sprouter® Root Rain® 24 Site Spray Clone Machine is a complete system to start 24 individual plant cuttings or clones. The spray generated from the aeroponic cloner offers suspended cuttings and a rich combination of oxygen and water for accelerated and healthy root growth. Super Sprouter® Root Rain® Cloner is easy to assemble and simple to use.

    Comes with:

    • Reservoir
    • Lid
    • 30 multi-colored neoprene inserts
    • Internal Sprayer
    • Water Pump
    • Air Pump
    • 4 in. Air Stone
    • Tubing
    • Instructions

    Learn more about Cloning & Propagation in our Learning Center

    Instructions
    1. Except for the water pump and sprayer manifold, rinse all parts in lukewarm water
    2. The orientation of the red sprayers was factory set for better spraying coverage. If you feel customization of the spray pattern is required; simply rotate the red sprayers as required.
    3. Carefully fit the water pump onto the spray manifold. To prevent breaking the manifold tube, avoid using excessive force.
    4. Use the pump suctions cups to adhere the pump to the base of the rub. Place the pump into position. Feed the power cord through the slot in the rim on the short side of the tub
    5. Unpack the EcoPlus Air 1 Plus pump and Air Stone. Connect the airstone to the pump via the supplied vinyl tubing. Place the air stone in the bottom of the tub opposite the water intake on the pump. Feed the vinyl tubing through the other slot in the rim on the short side of the tub.
    6. The air pump should be placed and kept higher in elevation than the water line.
    7. Before putting clones into the system, fill the water to a level just under the red sprayers in the tub. Then, place the lid back on. Turn on the machine to rinse all internal parts. Run for at least 5 minutes. Then, discard and replace the water. Repeat this procedure.
    8. For a correct fit, place the lid on the base and ensure that it is watertight.
    Lighting Fixtures

    Fluorescent grow lights are best known for their propagation abilities. These lights do wonders for clones, seedlings, and young plants since they have low heat output and less intense light. HID and LED grow lights need to be placed further away from plants, and a lot of light is wasted. Fluorescent tubes are smaller and save the grower money on electricity costs. These lights can also emit a full spectrum of plants.

    If your indoor garden is small, you will have to grow smaller plants, and T5 and CFL grow lights are great for this. If you are growing in a small enclosed space, fluorescent grow lights will be your best option. We have a wide range of lighting fixtures to choose from which can be seen here - Fluorescent Lighting Fixtures

    Super Sprouter® Root Rain® 24 Site Spray Clone Machine is a complete system to start 24 individual plant cuttings or clones. The spray generated from the aeroponic cloner offers suspended cuttings and a rich combination of oxygen and water for accelerated and healthy root growth. Super Sprouter® Root Rain® Cloner is easy to assemble and simple to use. Comes with tub, lid, 30 multicolored neoprene inserts, internal sprayer and pump, air pump, 4 in air stone, tubing, and instructions.

    Weight (lbs)4.75
    Length (in)16.75
    Width (in)12.5
    Height (in)7.5
    Barcode849969028065