Quest Hi-E Dry Dehumidifier

SKU: 4036730

2,999.95 2999.9500000000003 USD 2,999.95

0.00

Quest HI-E Dry dehumidifiers can be used standalone or in ducted installations. The HI-E DRY is an ideal solution for areas with heavier moisture loads that demand the elimination of mold, mildew, and their associated odors. Its heavy-duty swivel casters provide easy movement throughout your facility.

  • Pints per Day

This combination does not exist.


Quest Hi-E Dry Dehumidifier


Quest HI-E Dry dehumidifiers can be used standalone or in ducted installations.

Get the flexibility you need in an economical package with the Hi-E DRY 120 or 195 Dehumidifiers.

Note: The Quest Hi-E Dry does NOT INCLUDE communication wires and CAN'T be wired to a humidistat

Hi-E DRY dehumidifiers are designed and built with an emphasis on efficiency and durability. Today’s Hi-E DRY dehumidifiers remove up to seven pints of water per kilowatt hour, while the industry average remains at only two to three pints.

The high-efficiency design of Hi-E DRY dehumidifiers offers more than just dramatically reduced utility costs. The larger water removal capacity from a smaller, more efficient refrigeration system eliminates the need for 220-volt circuits in many applications. The smaller refrigeration system allows Hi-E DRY 120 & 195 dehumidifiers to cost less than other commercial dehumidifiers of equal capacity.

The Hi-E DRY high-efficiency dehumidifier utilizes refrigeration to cool the incoming air stream below its dew point as it passes through the dehumidification (evaporator) coil. This cooling results in the removal of moisture (latent heat) and a reduction in temperature (sensible heat). The cooled and dried air is used to precool the incoming air stream resulting in up to a 200 percent increase in overall efficiency. After the pre-cooling stage, the processed air is reheated by passing through the condenser coil. The latent heat removed by the evaporator coil is returned to the air stream at this stage as sensible heat, resulting in an overall temperature increase from the incoming air.

Features & Benefits of the Hi-E Dry
  • Controlled by a dehumidistat with settings from 20 to 80 percent relative humidity and a positive “on” and “off” setting.
  • Portable and provided with four casters.
  • Contains an internal condensate pump capable of lifting condensate 17 feet and 20 ft(195)/30 ft(120) of condensate hose.
  • Wiring is through a factory-installed six-foot power cord; 115 volts with the ground.




Weight (lbs)151
Length (in)26
Width (in)24
Height (in)48
Barcode859029004762
Supply Voltage:115 VAC 13.1 amps - NEMA 5-20P
Power:1500 Watts @ 80°, 60%
Water Removal:195 pints (80°, 60%)
Blower:610 CFM
Operating Range:40°F–110°F