TrolMaster 4-in-1 Sensor for Hydro-X Pro and Hydro-X Plus

SKU: MBS-PRO

398.05 398.05 USD 398.05

398.05

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor, and photocell to create the perfect all-in-one environmental sensor. It is designed for the Hydro-X Pro system only. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.

    This combination does not exist.


    TrolMaster 4-in-1 Sensor for Hydro-X Pro and Hydro-X Plus

    The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor, and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems.

     Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.

     The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.

    1x MBS-Pro Sensor

    Input Voltage: 0~11.5V
    Maximum Current: 0.2A
    Working Environment: Temperature 32-122°F, Humidity=90%
    Package Dimensions(L*W*H): 275mm X 164mm X 62mm

    Please Note: The MBS-Pro requires the SPH-1 for supplemental power.

    "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

    Weight (lbs)1.30
    Length (in)11
    Width (in)7
    Height (in)3
    Barcode6970207971325