Directions For Use:

• Turn off lights and close blinds as Chlorine Dioxide (ClO2) is photoreactive
• If treating individual rooms, seal off the room to prevent the gas from exiting the room.
• If possible, use Gard’nClean GC liquid at 100ppm to spray down all surfaces in the room before using Gard’nClean Fast Release. (The evaporation of the GC Clean Liquid acts as an additional fumigant, resulting in an entourage effect.)
• Place the Gard’nClean Fast Release in the center of the room, as high up as possible. The ClO2 gas will disperse throughout the entire room. ClO2 is heavier than air, so do not place it under tables or obstruct it. We recommend fans to help keep the ClO2 dispersed evenly throughout the space. If treating all areas on a shared HVAC system, you can place the Fast Release by the return and allow the HVAC system to disperse the gas into the environment.
• Remove the Foil pouch from the jar, and remove the Gard’nClean Fast release sachet from the foil pouch without tearing the sachet.
• Place Gard’nClean Fast Release sachet in the provided jar and fill with approx 175 ml of water (to the fill line)
• Leave the room immediately and stay out of the room for a minimum of 4 hours.
• Ventilate the room for at least one hour before returning without PPE.
• Upon re-entry dispose remaining liquid in the container down any drain and discard the sachet into any trash receptacle.