Twister B4 Bucker

SKU: 02-10004B

24,271.00 24271.0 USD 24,271.00

24,271.00

Equipped with the industry's most powerful motor, the Twister B4 is capable of delivering consistent, safe results, without the need for downtime. Bucking on a large scale sucks. But it doesn’t have to. The Twister B4 ‘Bucker’ raises the bar on single piece flow by adding advanced, patent-pending bucking technology to your process flow, replacing the work that crews of 5-7 used to do by hand. 

    This combination does not exist.


    Twister B4 Bucker

    Equipped with the industry's most powerful motor, the Twister B4 is capable of delivering consistent, safe results, without the need for downtime. Bucking on a large scale sucks. But it doesn’t have to. The Twister B4 ‘Bucker’ raises the bar on single piece flow by adding advanced, patent-pending bucking technology to your process flow, replacing the work that crews of 5-7 used to do by hand. Process up to 150+ lbs/hr (fully hydrated) with one unit! 

    What's included?

    Twister B4 Bucking Machine

    1 Year Standard Warranty 

    Stand can be purchased separately.


    The Twister B4 ‘Bucker’ is the newest and latest addition from the already legendary Twister line-up that helps producers further automate their current operation. The Twister B4 ‘Bucker’ is a flexible design that can be installed/operated on a stainless bench, table, or the accessory stand. It can even be run off a tailgate! Made to work with any size grow or operation that relies on high-quality products that get the job done day-in day-out, without risk of downtime or machine failure. Manufactured specifically for growing operations by the brand you trust and know. 

    Designed for Your Facility

    The B4 'Bucker' was engineered to meet the needs of everyone that contributes to a successful harvest at your facility. Constructed of only the highest quality materials and finishes, the Twister B4 is designed to deliver continuous, reliable performance under the most demanding conditions in commercial facilities. Able to meet strict medical quality assurance programs in the US and Canada. 

    Take a look below at the various set of features that further breakdown the quality, efficiency, sanitation benefits, and operator ease-of-use which make this machine stand out versus the competition. 

    The First Step To Perfecting Your Harvest Process

    • 50+ lbs/hr throughput (speeds of up to 30 ft/sec).
    • Quick and easy changeouts with removable cartridges.
    • Patent-pending “Active Gearing” drivetrain reduces jams and downtime.
    • Washdown Rated (Watertight) / IP69K and IP66K. Pressure washable.
    • SafeFeed™ adaptor on the entry holes prevents injury.
    • Emergency stop. Clear and within reach.
    • Easy to use. Ergonomically designed. Easy to load and operate.
    • Easy to clean. Breaks down in less than 2 minutes. Easy access to components.
    • Minimal training required. Manuals, videos, and tips available on the website.
    • Buck dry or fully hydrated.

    Quality Assured, Certified, & Compliant

    • Enjoy the ability to slide the B4 into your existing GMP facility. No extra work required.
    • CE Certified. https://cemarking.net/what-is-ce-marking/
    • CSA Compliant. https://www.csagroup.org/service/certification/
    • UL Compliant. https://ulstandards.ul.com/
    • The B4 uses tension-adjustable neoprene rubber rollers.
    • Front and exit shrouds. Adjustable front shroud allows you to customize the height to match your outputs. Exit shroud allows stems to slide off into receptacles.
    • Emergency stop. Easy to find, easy to use.
    • 304 Stainless throughout with anodized aluminum. The quality Twister is known for.
    • Easy to clean. Breaks down in less than 2 minutes. Easy access to components.

    Operator Approved

    • Ergonomically designed. Flexible enough to run a bench, a stand, or a table.
    • Easy to use and operate. Complexity has been removed so it’s simple in, simple out.
    • SafeFeed™ adaptor prevents injury. Optional/removable safety device protects fingers from the inner rollers.
    • Removable feed cartridges - Quick and easy changeouts. An industry-first. Swap out cartridges after a strain is complete and slide in a new QA approved one. Zero downtime.
    • Patent-pending gearing system reduces jams and downtime. Adjusts on-the-fly to the variability in stem sizes.
    • Adjustable speed to match your process. 10 speed setting to match your bucking process to your overall production.
    • Pulse speed controls to burst in forward and reverse. All controls are in one easy place.
    • Forward / Reverse.
    • Emergency stop. Easy to find, easy to use.


    Sanitation & Clean Room Approved

    • Easy to clean. Breaks down in less than 2 minutes. Easy access to components.
    • Removable front and exit shrouds. Adjustable front shroud allows you to customize the height to match your outputs. Exit shroud allows stems to slide off into receptacles.
    • Removable feed cartridges - Quick and easy changeouts. An industry-first. Swap out cartridges after a strain is complete and slide in a new QA approved one. Zero downtime.
    • 304 Stainless throughout with anodized aluminum. The quality Twister is known for.
    • The B4 uses tension-adjustable neoprene rubber rollers.
    • Washdown Rated (Watertight) / IP69K and IP66K. Pressure washable.
    • No tools needed for disassembly.
    • Minimal small parts.


    Quality Assurance Like Never Before 

    Twister harvesting equipment is used by over 70% of the world’s largest producers. The B4 ‘Bucker’ was designed to meet the most stringent QA programs available. What makes the B4 really different? Plain and simple - Swappable Cartridges. We feel this tech is a game changer for commercial grow and QA departments. Finished with a specific strain? Simply swap in a QA approved cartridge and you’re back up and running. Zero downtime. #gamechanger 

    Powerful Non-Stop Performance

    The B4 ‘Bucker’ is designed to deliver non-stop performance under the most demanding conditions known to commercial growing. An industry first, the B4 ‘Bucker’ uses an “Active Gearing” system that allows the B4 to process stems up to 3/4” in diameter at speed rates of 150+ lbs/hr--no jams! 

    Built To Last

    • 1 HP Heavy Durt Motor
    • Continous Duty Cycle
    • 3/4" Max stem Diameter
    • Adjustable Speed Control
    • 304 Stainless Steel
    • Designed for Conveyors
    • Designed to Last

    Upgrade Your Twister T4 Trimming Machine

    Your Twister T4 Trimming Machine can be upgraded even further with add ons such as conveyors and rails, a bucker, replacement parts and accessories, and drying rack systems. 

    Conveyors and Rails 

    Conveyors can increase your speed and consistency by up to 20%. They are FDA approved, and make it easy to ensure your T4 is always being fed the right amount of flowers, throughout the entire day. They are adjustable in height, and can be used with both the T4 and the T2. We carry both quality control conveyors and feed conveyors, both which are very important. 

    Buckers 

    Adding a bucker to your trimming operation will take your efficiency and profit through the roof. A lot of emphasis gets put on the trimming process, but removing the stems and branches from your buds first is essential. You understand how important automating trimming is, but automating your de-stemming process is equally important. 

    Replacement parts and accessories You may want to grab some replacement parts and accessories, such as extra tumblers for trimming different strains and preventing cross contamination. Or, maybe you need some leaf collector bags or filters. We also carry replacement belts and machine cleaner to keep everything running smooth. 

    Twister Drying Rack Systems 

    What do you do with your buds after you trim them? If you are trimming wet, the next step is to dry them. Twister drying racks are stackable, and make drying your flower easy and saves space. 

    Twister Freezing & Handling Trays 

    The new Twister Stackable Freezing / Handling Trays are perfect for handling and freezing product. Designed to stack on top of each other for maximum airflow, you can easily stack 50 of these ventilated trays per palette for easy storage and movement to and from rooms or locations. High-density food-grade polyethylene is 100% freezer and dishwasher safe. Maximum durability. Trim straight into these bad boys!!

    Weight (lbs)285
    Length (in)37.5
    Width (in)13
    Height (in)14.5
    BarcodeN/A
    Input Voltage 120V, 60 Hz Single Phase
    Current Draw < 2A Operating.14.8A Max
    Drive Motor 1HP, IP66/IP69K Washdown
    Motor RPM 1750 RPM
    Roller Sets Neoprene Rubber
    Circuit Breaker Required 20A / 120V
    Connector (plug) NEMA 5-15P
    Fused Yes, Thermally
    Feed Throughput 150 lbs/hr (Hydrated)
    Feed Entry Sizes 3-hole (1/4”, 1/2”, 3/4”)
    Feed Types Wet/Dry
    Variable Speed Yes, Thermally
    Motor PulseYes, Thermally
    Reverse OperationYes
    Duty CycleContinuous
    Maintenance Interval > 1000 hours
    Pull Speed 10 - 30 in/s
    Pull Strength > 430 lbs
    GMP CompliantYes
    UL CompliantYes
    CE CompliantYes
    RoHS CompliantYes
    Primary Material (Cartridge) 304 Stainless